The Twin6 Be is an active, 3 way, professional nearfield/midfield speaker (3 built-in amplifiers - 2x150 +100W rms), comprised of two 6.5 inch (16.5cm) "W" cone sandwich composite drivers, loaded by two large section laminar bass ports and a Focal inverted dome pure Beryllium tweeter.

Both 6.5" drivers handle low frequencies but only one of the two (selectable) is passing lo-mid frequencies.

The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

FutureMusic: Platinum Award

SPECIFICATIONS

• Frequency Response: 40Hz - 40kHz
• Maximum SPL: 115 dB SPL (peak @ 1m)
• Input Impedance: 10kΩ
• Input Connector: XLR, Balanced
• Input Sensitivity: Adjustable, +4dBu or -10dBV
• LF Amplifier Stage: 150W rms, BASH® technology
• LF/MF Amplifier Stage: 150W rms, BASH® technology
• HF Amplifier Stage: 100W rms, class AB
• Woofer: 2 x "W" composite sandwich cone, Focal 6W4370B 6.5" drive unit
• High Frequency: Focal TB871 Beryllium inverted dome tweeter
• Shielding: Integral through cancellation magnets or by magnet design
• Power Voltage: 115V (3.15A fuse rating)
• Power Connection: IEC inlet and detachable power cord
• User Controls: Input level switch, Speaker (left/right) switch, LF and HF contours via potentiometers, On/Off switch, voltage selector
• Cabinet: 19mm MDF panels with internal braces
• Finish: Real red veneer sides, black on body
• Dimensions: 250mm x 500mm x 340mm (9.8" x 19.7" x 13.4")